Abstrak


Pengaruh Perlakuan Panas terhadap Frekuensi Pribadi dan Rasio Redaman Komposit Hibryd Serat Karbon dan Serat Gelas


Oleh :
Yon Afif Hidayat - I0409055 - Fak. Teknik

Abstrak
Penelitian ini bertujuan untuk mengkaji effek perlakuan panas terhadap karakteristik dinamik komposit hybrid. Komposit hybrid terdiri dari unsaturated polyester resin yang diperkuat serat gelas dan serat karbon dengan fraksi volume 0.4 dan dibuat dengan metode hand lay-up. Pengujian getaran dilakukan menurut ASTM E756. Variabel penelitian yang dikaji berupa perlakuan panas (tanpa pemanasan, 100 oC, 200 oC, dan 280 oC) dan konfigurasi pemasangan komposit. Metode yang digunakan dalam penentuan frekuensi pribadi dan rasio redaman adalah metode half-power bandwidth.
Hasil penelitian menunjukan bahwa perlakuan panas dan konfigurasi pemasangan struktur komposit (upright, downward, dan horizontal) berpengaruh terhadap frekuensi pribadi dan rasio redaman. Karakteristik komposit setelah pemanasan, menunjukkan bahwa pada temperatur sedang (di bawah 100 oC) nilai frekuensi pribadi meningkat dan rasio redaman menurun, akibat terjadi peningkatan kekakuan komposit. Pada suhu tinggi (di atas 100 oC) frekuensi pribadi akan semakin kecil dan rasio redaman akan semakin besar seiring bertambahnya suhu. Konfigurasi pemasangan komposit pada orientasi downward memiliki frekuensi pribadi paling tinggi dibandingkan dengan upright dan horizontal, akan tetapi memiliki rasio redaman paling kecil dibandigkan dengan upright and horizontal.
Kata kunci : frekuensi pribadi, komposit hybrid, konfigurasi tumpuan, perlakuan panas, rasio redaman.

Abstract
The purpose of this study is to examine the effect of heat treatment to the dynamic characteristic of carbon-glass fiber hybrid composite. The hybrid composite was consist of unsaturated polyester resin reinforced glass and carbon fiber with volume fraction 0.4 and made by hand lay-up method. The vibration test were conducted according to ASTM E756. The experiment variable studied is heat treatment (without heat treat, 100 oC, 200 oC, and 280 oC) and installation composite configuration. The damping ratio was determine using half-power bandwidth method.
The results showed that the heat treatment and installation composite configuration (upright, downward, dan horizontal) affect to the natural frequency and the damping ratio. The characteristic of the composite after heating, revealed that at moderate temperatures (lower than 100 oC) the natural frequency value increase and the damping ratio decrease causes an improvement of composite stiffness. In high temperatures (higher than 100 oC) the natural frequency will be smallest and the damping ratio will be highest when the temperature greater. The configuration installation of composite structures on the downward orientation will have the highest natural frequency than upright and horizontal result, however have the damping ratio value smallest than upright and horizontal.
Keyword : damping ratio, heat treatment, hybrid composite, natural frequency, support configuration.