KARAKTERISASI SIFAT MEKANIK SERAT OPTIK BERBASIS POLIMER YANG DIFABRIKASI MENGGUNAKAN METODE DOUBLE CRUCIBLE DENGAN FAKTOR VARIASI KETINGGIAN CRUCIBLE
Penulis Utama
:
IRWAN ANDRIYANTO
NIM / NIP
:
M0204032
×ABSTRACT
Research about fabrication of plastic optical fiber has produced a set
fabrication tool have the shape of fiber drawing with height 250 cm. Fiber
drawing that used for fabrication refer to double crucible method. With fiber
drawing referred has been conducted fabrication test by using polyprophylene as
core and polymer adhesive (glue gun) as cladding. Polymer determination as core
and cladding is relied on test of materials refracting index. Measurement Result
shows refracting index polyprophylene 1,494 bigger than refracting index glue
gun 1,490. Fabrication are conducted with height variation crucible to temperature
and attraction speed constant. From fibre that produced conducted diameter
measurement and characteristic test of mechanical. Research result shows
negative correlation between height variation crucible and diameter core and slope
-0,08. Value of fibre elasticity modulus tends to show uniformed value, not base
on height variation in course of fabrication core and also veneering core with
cladding.
Keyword : Fabrication, double crucible, plastic optical fiber, height, elasticity.
×
Penulis Utama
:
IRWAN ANDRIYANTO
Penulis Tambahan
:
-
NIM / NIP
:
M0204032
Tahun
:
2008
Judul
:
KARAKTERISASI SIFAT MEKANIK SERAT OPTIK BERBASIS POLIMER YANG DIFABRIKASI MENGGUNAKAN METODE DOUBLE CRUCIBLE DENGAN FAKTOR VARIASI KETINGGIAN CRUCIBLE
Edisi
:
Imprint
:
Surakarta - FMIPA - 2008
Program Studi
:
S-1 Fisika
Kolasi
:
Sumber
:
Kata Kunci
:
Jenis Dokumen
:
Skripsi
ISSN
:
ISBN
:
Link DOI / Jurnal
:
-
Status
:
Public
Pembimbing
:
Penguji
:
Catatan Umum
:
Fakultas
:
×
File
:
Harus menjadi member dan login terlebih dahulu untuk bisa download.
