<!--[if gte mso 9]><xml> </xml><![endif]-->

Latar Belakang: Penggunaan mesin, alat angkat-angkut, bahan kimia yang digunakan dapat menimbulkan risiko kepada tenaga kerja. Tujuan penelitian adalah mengetahui Hazard Identification Risk Assesment and Determining Control (HIRADC) di area press 4000 ton PT. Gemala Kempa Daya.

Metode: Penelitian menggunakan metode deskriptif yang memberikan gambaran program identifikasi bahaya, penilaian dan upaya pengendalian risiko yang dilakukan di area press 4000 ton PT. Gemala Kempa Daya terhadap potensi bahaya yang ada. Hasil yang didapat kemudian dibandingkan dengan OHSAS 18001:2007 klausul 4.3.1.

Hasil: Area press 4000 ton terdapat potensi bahaya kebisingan, getaran, terpeleset, tertabrak dies, terjepit, kejatuhan, tersandung, ergonomi dan tergores. Risiko hampir tidak ada terdapat pada Setting/Bongkar Stopper, Setting/Bongkar Dies, Balik Side Rail, dan Dorong Kereta Side Rail, risiko ringan pada Angkat Side Rail dengan Hoist, Unloading Part dengan Hoist,  risiko sedang pada dan Pasang Spacer, risiko berat pada produksi press 4000 ton. Pengendalian yang
dilakukan meliputi engineering control, administrasi dan penggunaan APD.

Simpulan: PT. Gemala Kempa Daya telah menerapkan Hazard Identification Risk Assesment and Determining Control, sehingga dapat menurunkan risiko terjadinya kecelakaan sesuai dengan OHSAS 18001:2007 Klausul 4.3.1. Saran yang diberikan adalah melakukan sosialisasi kepada tenaga kerja mengenai IBPPPR di area press 4000 ton.

Kata kunci: Hazard Identification Risk Assesment and Determining Control

ackground: The use of the machine, lift-transport equipment, chemicals used may pose a risk to the workforce. The purpose of the research is to know the Hazard Identification Risk Assesment and Determining Control (HIRADC) in the area of press 4000 ton PT. Gemala Kempa Daya.

Methods: A descriptive study using the method which gives an assessment of hazard identification program, and risk control efforts undertaken in the area of press 4000 ton PT. Gemala Kempa Daya. Against the potential dangers that exist. The results obtained are then compared with the OHSAS 18001: 2007 clause 4.3.1.

Result: Area Press 4000 Ton there are potential dangers of noise, vibration, slip, hit by dies, wedged, stumble, fall, ergonomics and scratched. There is almost no risk in Setting/uninstall/Uninstall Setting Stopper, Dies, behind the Side Rail, and push the Buggy Side Rail, light on risks Raise Side Rail with Hoist, Hoist, Unloading the Part with the risk of being at risk, the Spacer and place weight on the production press 4000 ton. Controlling conducted include engineering control, administration and use of the APD.

Conclusion: PT. Gemala Kempa Daya  has implemented a Hazard Identification Risk Assesment and Determining Control, so that it can lower the risk of the occurrence of the accident in accordance with OHSAS 18001: 2007 Clause 4.3.1. The advice given is doing to the  socialization of labor IBPPPR in the press 4000  ton.

Key: Hazard Identification Risk Assesment and Determining Control

<!--[if gte mso 9]><xml> Normal 0 false false false EN-US X-NONE X-NONE </xml><![endif]--><!--[if gte mso 9]><xml> </xml><![endif]--><!--[if gte mso 10]> <style> /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} </style>